<?xml version="1.0" encoding="UTF-8"?>
<protocol name="kde_output_device_v2">
  <copyright><![CDATA[
    SPDX-FileCopyrightText: 2008-2011 Kristian Høgsberg
    SPDX-FileCopyrightText: 2010-2011 Intel Corporation
    SPDX-FileCopyrightText: 2012-2013 Collabora, Ltd.
    SPDX-FileCopyrightText: 2015 Sebastian Kügler <sebas@kde.org>
    SPDX-FileCopyrightText: 2021 Méven Car <meven.car@enioka.com>

    SPDX-License-Identifier: MIT-CMU
    ]]></copyright>

  <interface name="kde_output_device_registry_v2" version="23">
    <description summary="output devices">
      This interface can be used to list output devices.

      If this global is bound with a version less than 21, the unsupported_version
      protocol error will be posted.
    </description>

    <enum name="error">
      <description summary="kde_output_device_registry_v2 error values">
        These errors can be emitted in response to some requests.
      </description>
      <entry name="unsupported_version" value="0"
             summary="the registry was bound with an unsupported version"/>
    </enum>

    <event name="finished" type="destructor" since="21">
      <description summary="no new output announcements">
        This event is sent in response to the stop request. The compositor will
        immediately destroy the object after sending this event.
      </description>
    </event>

    <request name="stop" since="21">
      <description summary="stop receiving updates">
        This request indicates that the client no longer wants to receive new
        output announcements. The compositor will send the
        kde_output_device_registry_v2.finished event in response to this request.
        The compositor may still send new output announcements after calling this
        request until the kde_output_device_registry_v2.finished event is sent.
      </description>
    </request>

    <event name="output" since="21">
      <description summary="new available output">
        This event is sent when a new output is connected or after binding this
        global to list all available outputs.
      </description>
      <arg name="output" type="new_id" interface="kde_output_device_v2"/>
    </event>
  </interface>

  <interface name="kde_output_device_v2" version="23">
    <description summary="output configuration representation">
      An output device describes a display device available to the compositor.
      output_device is similar to wl_output, but focuses on output
      configuration management.

      A client can query all global output_device objects to enlist all
      available display devices, even those that may currently not be
      represented by the compositor as a wl_output.

      The client sends configuration changes to the server through the
      outputconfiguration interface, and the server applies the configuration
      changes to the hardware and signals changes to the output devices
      accordingly.

      This object is published as global during start up for every available
      display devices, or when one later becomes available, for example by
      being hotplugged via a physical connector.

      Warning! The protocol described in this file is a desktop environment
      implementation detail. Regular clients must not use this protocol.
      Backward incompatible changes may be added without bumping the major
      version of the extension.
    </description>

    <enum name="subpixel">
      <description summary="subpixel geometry information">
        This enumeration describes how the physical pixels on an output are
        laid out.
      </description>
      <entry name="unknown" value="0"/>
      <entry name="none" value="1"/>
      <entry name="horizontal_rgb" value="2"/>
      <entry name="horizontal_bgr" value="3"/>
      <entry name="vertical_rgb" value="4"/>
      <entry name="vertical_bgr" value="5"/>
    </enum>

    <enum name="transform">
      <description summary="transform from framebuffer to output">
        This describes the transform, that a compositor will apply to a
        surface to compensate for the rotation or mirroring of an
        output device.

        The flipped values correspond to an initial flip around a
        vertical axis followed by rotation.

        The purpose is mainly to allow clients to render accordingly and
        tell the compositor, so that for fullscreen surfaces, the
        compositor is still able to scan out directly client surfaces.
      </description>

      <entry name="normal" value="0"/>
      <entry name="90" value="1"/>
      <entry name="180" value="2"/>
      <entry name="270" value="3"/>
      <entry name="flipped" value="4"/>
      <entry name="flipped_90" value="5"/>
      <entry name="flipped_180" value="6"/>
      <entry name="flipped_270" value="7"/>
    </enum>

    <event name="geometry">
      <description summary="geometric properties of the output">
        The geometry event describes geometric properties of the output.
        The event is sent when binding to the output object and whenever
        any of the properties change.
      </description>
      <arg name="x" type="int"
         summary="x position within the global compositor space"/>
      <arg name="y" type="int"
         summary="y position within the global compositor space"/>
      <arg name="physical_width" type="int"
         summary="width in millimeters of the output"/>
      <arg name="physical_height" type="int"
         summary="height in millimeters of the output"/>
      <arg name="subpixel" type="int"
         summary="subpixel orientation of the output"/>
      <arg name="make" type="string"
         summary="textual description of the manufacturer"/>
      <arg name="model" type="string"
         summary="textual description of the model"/>
      <arg name="transform" type="int"
         summary="transform that maps framebuffer to output"/>
    </event>

    <event name="current_mode">
      <description summary="current mode">
        This event describes the mode currently in use for this head. It is only
        sent if the output is enabled.
      </description>
      <arg name="mode" type="object" interface="kde_output_device_mode_v2"/>
    </event>

    <event name="mode">
      <description summary="advertise available output modes and current one">
        The mode event describes an available mode for the output.

        When the client binds to the output_device object, the server sends this
        event once for every available mode the output_device can be operated by.

        There will always be at least one event sent out on initial binding,
        which represents the current mode.

        Later if an output changes, its mode event is sent again for the
        eventual added modes and lastly the current mode. In other words, the
        current mode is always represented by the latest event sent with the current
        flag set.

        The size of a mode is given in physical hardware units of the output device.
        This is not necessarily the same as the output size in the global compositor
        space. For instance, the output may be scaled, as described in
        kde_output_device_v2.scale, or transformed, as described in
        kde_output_device_v2.transform.
      </description>
      <arg name="mode" type="new_id" interface="kde_output_device_mode_v2"/>
    </event>

    <event name="done">
      <description summary="sent all information about output">
        This event is sent after all other properties have been
        sent on binding to the output object as well as after any
        other output property change have been applied later on.
        This allows to see changes to the output properties as atomic,
        even if multiple events successively announce them.
      </description>
    </event>

    <event name="scale">
      <description summary="output scaling properties">
        This event contains scaling geometry information
        that is not in the geometry event. It may be sent after
        binding the output object or if the output scale changes
        later. If it is not sent, the client should assume a
        scale of 1.

        A scale larger than 1 means that the compositor will
        automatically scale surface buffers by this amount
        when rendering. This is used for high resolution
        displays where applications rendering at the native
        resolution would be too small to be legible.

        It is intended that scaling aware clients track the
        current output of a surface, and if it is on a scaled
        output it should use wl_surface.set_buffer_scale with
        the scale of the output. That way the compositor can
        avoid scaling the surface, and the client can supply
        a higher detail image.
      </description>
      <arg name="factor" type="fixed" summary="scaling factor of output"/>
    </event>

    <event name="edid">
      <description summary="advertise EDID data for the output">
        The edid event encapsulates the EDID data for the outputdevice.

        The event is sent when binding to the output object. The EDID
        data may be empty, in which case this event is sent anyway.
        If the EDID information is empty, you can fall back to the name
        et al. properties of the outputdevice.
      </description>
      <arg name="raw" type="string" summary="base64-encoded EDID string"/>
    </event>

    <event name="enabled">
      <description summary="output is enabled or disabled">
        The enabled event notifies whether this output is currently
        enabled and used for displaying content by the server.
        The event is sent when binding to the output object and
        whenever later on an output changes its state by becoming
        enabled or disabled.
      </description>
      <arg name="enabled" type="int" summary="output enabled state"/>
    </event>

    <event name="uuid">
      <description summary="A unique id for this outputdevice">
        The uuid can be used to identify the output. It's controlled by
        the server entirely. The server should make sure the uuid is
        persistent across restarts. An empty uuid is considered invalid.
      </description>
      <arg name="uuid" type="string" summary="output devices ID"/>
    </event>

    <event name="serial_number">
      <description summary="Serial Number">
        Serial ID of the monitor, sent on startup before the first done event.
      </description>
      <arg name="serialNumber" type="string"
          summary="textual representation of serial number"/>
    </event>
    <event name="eisa_id">
      <description summary="EISA ID">
        EISA ID of the monitor, sent on startup before the first done event.
      </description>
      <arg name="eisaId" type="string"
         summary="textual representation of EISA identifier"/>
    </event>

    <enum name="capability" bitfield="true">
      <description summary="describes capabilities of the outputdevice">
        Describes what capabilities this device has.
      </description>
      <entry name="overscan" value="0x1"
           summary="if this output_device can use overscan"/>
      <entry name="vrr" value="0x2"
           summary="if this outputdevice supports variable refresh rate"/>
      <entry name="rgb_range" value="0x4"
             summary="if setting the rgb range is possible"/>
      <entry name="high_dynamic_range" value="0x8" since="3"
             summary="if this outputdevice supports high dynamic range"/>
      <entry name="wide_color_gamut" value="0x10" since="3"
             summary="if this outputdevice supports a wide color gamut"/>
      <entry name="auto_rotate" value="0x20" since="4"
             summary="if this outputdevice supports autorotation"/>
      <entry name="icc_profile" value="0x40" since="5"
             summary="if this outputdevice supports icc profiles"/>
      <entry name="brightness" value="0x80" since="9"
             summary="if this outputdevice supports the brightness setting"/>
      <entry name="built_in_color" value="0x100" since="12"
             summary="if this outputdevice supports the built-in color profile"/>
      <entry name="ddc_ci" value="0x200" since="14"
             summary="if this outputdevice supports DDC/CI"/>
      <entry name="max_bits_per_color" value="0x400" since="15"
             summary="if this outputdevice supports setting max bpc"/>
      <entry name="edr" value="0x800" since="16"
             summary="if this outputdevice supports EDR"/>
      <entry name="sharpness" value="0x1000" since="17"
             summary="if this outputdevice supports the sharpness setting"/>
      <entry name="custom_modes" value="0x2000" since="18"
             summary="if this outputdevice supports custom modes"/>
      <entry name="auto_brightness" value = "0x4000" since="19"/>
      <entry name="hdr_icc_profile" value="0x8000" since="22"
             summary="if this outputdevice supports HDR ICC profiles"/>
      <entry name="abm_level" value="0x10000" since="23"
             summary="if this outputdevice supports the abm level setting"/>
    </enum>

    <event name="capabilities">
      <description summary="capability flags">
        What capabilities this device has, sent on startup before the first
        done event.
      </description>
      <arg name="flags" type="uint" enum="capability"/>
    </event>

    <event name="overscan">
      <description summary="overscan">
        Overscan value of the monitor in percent, sent on startup before the
        first done event.
      </description>
      <arg name="overscan" type="uint"
         summary="amount of overscan of the monitor"/>
    </event>

    <enum name="vrr_policy">
      <description summary="describes vrr policy">
        Describes when the compositor may employ variable refresh rate
      </description>
      <entry name="never" value="0"/>
      <entry name="always" value="1"/>
      <entry name="automatic" value="2"/>
    </enum>

    <event name="vrr_policy">
      <description summary="Variable Refresh Rate Policy">
        What policy the compositor will employ regarding its use of variable
        refresh rate.
      </description>
      <arg name="vrr_policy" type="uint" enum="vrr_policy"/>
    </event>

    <enum name="rgb_range">
      <description summary="describes RGB range policy">
        Whether full or limited color range should be used
      </description>
      <entry name="automatic" value="0"/>
      <entry name="full" value="1"/>
      <entry name="limited" value="2"/>
    </enum>

    <event name="rgb_range">
      <description summary="RGB range">
        What rgb range the compositor is using for this output
      </description>
      <arg name="rgb_range" type="uint" enum="rgb_range"/>
    </event>

    <event name="name" since="2">
      <description summary="Output's name">
        Name of the output, it's useful to cross-reference to an zxdg_output_v1 and ultimately QScreen
      </description>
      <arg name="name" type="string"/>
    </event>

    <event name="high_dynamic_range" since="3">
      <description summary="if HDR is enabled">
        Whether or not high dynamic range is enabled for this output
      </description>
      <arg name="hdr_enabled" type="uint" summary="1 if enabled, 0 if disabled"/>
    </event>

    <event name="sdr_brightness" since="3">
      <description summary="the brightness of sdr if hdr is enabled">
        If high dynamic range is used, this value defines the brightness in nits for content
        that's in standard dynamic range format. Note that while the value is in nits, that
        doesn't necessarily translate to the same brightness on the screen.
      </description>
      <arg name="sdr_brightness" type="uint"/>
    </event>

    <event name="wide_color_gamut" since="3">
      <description summary="if WCG is enabled">
        Whether or not the use of a wide color gamut is enabled for this output
      </description>
      <arg name="wcg_enabled" type="uint" summary="1 if enabled, 0 if disabled"/>
    </event>

    <enum name="auto_rotate_policy">
      <description summary="describes when auto rotate should be used"/>
      <entry name="never" value="0"/>
      <entry name="in_tablet_mode" value="1"/>
      <entry name="always" value="2"/>
    </enum>

    <event name="auto_rotate_policy" since="4">
      <description summary="describes when auto rotate is used"/>
      <arg name="policy" type="uint" enum="auto_rotate_policy"/>
    </event>

    <event name="icc_profile_path" since="5">
      <description summary="describes the path to the ICC profile used in SDR mode"/>
      <arg name="profile_path" type="string"/>
    </event>

    <event name="brightness_metadata" since="6">
      <description summary="metadata about the screen's brightness limits"/>
      <arg name="max_peak_brightness" type="uint" summary="in nits"/>
      <arg name="max_frame_average_brightness" type="uint" summary="in nits"/>
      <arg name="min_brightness" type="uint" summary="in 0.0001 nits"/>
    </event>

    <event name="brightness_overrides" since="6">
      <description summary="overrides for the screen's brightness limits"/>
      <arg name="max_peak_brightness" type="int" summary="-1 for no override, positive values are the brightness in nits"/>
      <arg name="max_average_brightness" type="int" summary="-1 for no override, positive values are the brightness in nits"/>
      <arg name="min_brightness" type="int" summary="-1 for no override, positive values are the brightness in 0.0001 nits"/>
    </event>

    <event name="sdr_gamut_wideness" since="6">
      <description summary="describes which gamut is assumed for sRGB applications">
          This can be used to provide the colors users assume sRGB applications should have based on the
          default experience on many modern sRGB screens.
      </description>
      <arg name="gamut_wideness" type="uint" summary="0 means rec.709 primaries, 10000 means native primaries"/>
    </event>

    <enum name="color_profile_source" since="7">
      <description summary="which source the compositor should use for the color profile on an output"/>
      <entry name="sRGB" value="0"/>
      <entry name="ICC" value="1"/>
      <entry name="EDID" value="2"/>
    </enum>

    <event name="color_profile_source" since="7">
      <description summary="describes which source the compositor uses for the color profile on an output in SDR mode"/>
      <arg name="source" type="uint" enum="color_profile_source"/>
    </event>

    <event name="brightness" since="8">
      <description summary="brightness multiplier">
        This is the brightness modifier of the output. It doesn't specify
        any absolute values, but is merely a multiplier on top of other
        brightness values, like sdr_brightness and brightness_metadata.
        0 is the minimum brightness (not completely dark) and 10000 is
        the maximum brightness.
        This is currently only supported / meaningful while HDR is active.
      </description>
      <arg name="brightness" type="uint" summary="brightness in 0-10000"/>
    </event>

    <enum name="color_power_tradeoff">
      <description summary="tradeoff between power and accuracy">
        The compositor can do a lot of things that trade between
        performance, power and color accuracy. This setting describes
        a high level preference from the user about in which direction
        that tradeoff should be made.
      </description>
      <entry name="efficiency" value="0" summary="prefer efficiency and performance"/>
      <entry name="accuracy" value="1" summary="prefer accuracy"/>
    </enum>

    <event name="color_power_tradeoff" since="10">
      <description summary="the preferred color/power tradeoff"/>
      <arg name="preference" type="uint" enum="color_power_tradeoff"/>
    </event>

    <event name="dimming" since="11">
      <description summary="dimming multiplier">
        This is the dimming multiplier of the output. This is similar to
        the brightness setting, except it's meant to be a temporary setting
        only, not persistent and may be implemented differently depending
        on the display.
        0 is the minimum dimming factor (not completely dark) and 10000
        means the output is not dimmed.
      </description>
      <arg name="multiplier" type="uint" summary="multiplier in 0-10000"/>
    </event>

    <event name="replication_source" since="13">
      <description summary="source output for mirroring"/>
      <arg name="source" type="string" summary="uuid of the source output"/>
    </event>

    <event name="ddc_ci_allowed" since="14">
      <description summary="if DDC/CI should be used to control brightness etc.">
        If the ddc_ci capability is present, this determines if settings
        such as brightness, contrast or others should be set using DDC/CI.
      </description>
      <arg name="allowed" type="uint" summary="1 if allowed, 0 if disabled"/>
    </event>

    <event name="max_bits_per_color" since="15">
      <description summary="override max bpc">
        This limits the amount of bits per color that are sent to the display.
      </description>
      <arg name="max_bpc" type="uint" summary="0 for the default / automatic"/>
    </event>

    <event name="max_bits_per_color_range" since="15">
      <description summary="range of max bits per color value"/>
      <arg name="min_value" type="uint" summary="the minimum supported by the driver"/>
      <arg name="max_value" type="uint" summary="the maximum supported by the driver"/>
    </event>

    <event name="automatic_max_bits_per_color_limit" since="15">
      <description summary="if and to what value automatic max bpc is limited"/>
      <arg name="max_bpc_limit" type="uint"
           summary="which value automatic bpc gets limited to. 0 if not limited"/>
    </event>

    <enum name="edr_policy" since="16">
      <description summary="when the compositor may make use of EDR"/>
      <entry name="never" value="0"/>
      <entry name="always" value="1"/>
    </enum>

    <event name="edr_policy" since="16">
      <description summary="when the compositor may apply EDR">
        When EDR is enabled, the compositor may increase the backlight beyond
        the user-specified setting, in order to present HDR content on displays
        without native HDR support.
        This will usually result in better visuals, but also increases battery
        usage.
      </description>
      <arg name="policy" type="uint" enum="edr_policy"/>
    </event>

    <event name="sharpness" since="17">
      <description summary="sharpness strength">
        This is the sharpness modifier of the output.
        0 is sharpness disabled and 10000 is the maximum sharpness
      </description>
      <arg name="sharpness" type="uint" summary="sharpness in 0-10000"/>
    </event>

    <event name="priority" since="18">
      <description summary="output priority">
        Describes the position of the output in the output order list,
        with lower values being earlier in the list. There's no specific
        value the list has to start at, this value is only used in sorting
        outputs.

        Note that the output order protocol is not sufficient for this,
        as an output may not be in the output order if it's disabled or
        mirroring another screen.
      </description>
      <arg name="priority" type="uint" summary="priority"/>
    </event>

    <event name="auto_brightness" since="20">
      <description summary="whether or not automatic brightness is enabled"/>
      <arg name="enabled" type="uint" summary="1 for enabled, 0 for disabled"/>
    </event>

    <request name="release" type="destructor" since="21">
      <description summary="destroy the output device">
        This notifies the compositor that the client no longer wishes to use
        the kde_output_device_v2 object.
      </description>
    </request>

    <event name="removed" since="21">
      <description summary="the output has been removed">
        This event is sent when the output device is disconnected and no new
        updates will be sent. The client should call the kde_output_device_v2.release
        request after receiving this event.
      </description>
    </event>

    <event name="hdr_icc_profile_path" since="22">
      <description summary="describes the path to the ICC profile used in HDR mode"/>
      <arg name="profile_path" type="string"/>
    </event>

    <event name="hdr_color_profile_source" since="22">
      <description summary="describes which source the compositor uses for the color profile on an output in HDR mode"/>
      <arg name="source" type="uint" enum="color_profile_source"/>
    </event>

    <event name="abm_level" since="23">
      <description summary="allowed level of adaptive backlight modulation">
        Adaptive backlight modulation is a feature that reduces the backlight
        and increases contrast of colors on the screen to improve power usage.
      </description>
      <arg name="level" type="uint" summary="0 is off, 4 is the maximum level"/>
    </event>
  </interface>

  <interface name="kde_output_device_mode_v2" version="22">
    <description summary="output mode">
      This object describes an output mode.

      Some heads don't support output modes, in which case modes won't be
      advertised.

      Properties sent via this interface are applied atomically via the
      kde_output_device.done event. No guarantees are made regarding the order
      in which properties are sent.
    </description>

    <event name="size">
      <description summary="mode size">
        This event describes the mode size. The size is given in physical
        hardware units of the output device. This is not necessarily the same as
        the output size in the global compositor space. For instance, the output
        may be scaled or transformed.
      </description>
      <arg name="width" type="int" summary="width of the mode in hardware units"/>
      <arg name="height" type="int" summary="height of the mode in hardware units"/>
    </event>

    <event name="refresh">
      <description summary="mode refresh rate">
        This event describes the mode's fixed vertical refresh rate. It is only
        sent if the mode has a fixed refresh rate.
      </description>
      <arg name="refresh" type="int" summary="vertical refresh rate in mHz"/>
    </event>

    <event name="preferred">
      <description summary="mode is preferred">
        This event advertises this mode as preferred.
      </description>
    </event>

    <event name="removed">
      <description summary="the mode has been destroyed">
        The compositor will destroy the object immediately after sending this
        event, so it will become invalid and the client should release any
        resources associated with it.
      </description>
    </event>

    <enum name="flags">
      <description summary="mode flags"/>
      <entry name="custom" value="0x1"/>
      <entry name="reduced_blanking" value="0x2"/>
    </enum>

    <event name="flags" since="19">
      <description summary="mode flags">
        This event describes the mode's flags.
      </description>
      <arg name="flags" type="uint" enum="flags"/>
    </event>
  </interface>

</protocol>
