
ALCATEL-IND1-E-SERVICE-MIB DEFINITIONS ::= BEGIN

        IMPORTS
                MODULE-IDENTITY, 
                OBJECT-IDENTITY,
		OBJECT-TYPE, 
                Integer32, Counter64	        FROM SNMPv2-SMI
		OBJECT-GROUP, 
                MODULE-COMPLIANCE	        FROM SNMPv2-CONF
		softentIND1eService    	FROM ALCATEL-IND1-BASE
		RowStatus, 
                TEXTUAL-CONVENTION,
                DisplayString,
                MacAddress			FROM SNMPv2-TC
		InterfaceIndex 			FROM IF-MIB
		;

        alcatelIND1EServiceMIB MODULE-IDENTITY
		LAST-UPDATED "201001200000Z"
		ORGANIZATION "Alcatel-Lucent"
		CONTACT-INFO
                "Please consult with Customer Service to ensure the most appropriate
                version of this document is used with the products in question:
 	
				                   Alcatel-Lucent, Enterprise Solutions Division
			                    (Formerly Alcatel Internetworking, Incorporated)
				                         26801 West Agoura Road
			 	                       Agoura Hills, CA  91301-5122
			      		                United States Of America
	
                Telephone:	    North America	+1 800 995 2696
				                        Latin America 	+1 877 919 9526
                                Europe		+31 23 556 0100
                                Asia		+65 394 7933
                                All Other	+1 818 878 4507
	
                Electronic Mail:	support@ind.alcatel.com
                World Wide Web:		http://alcatel-lucent.com/wps/portal/enterprise
                File Transfer Protocol:	ftp://ftp.ind.alcatel.com/pub/products/mibs"
                DESCRIPTION
                "The parameters for configuration of the E-Service feature.

                The right to make changes in specification and other information
                contained in this document without prior notice is reserved.

                No liability shall be assumed for any incidental, indirect, special, or
                consequential damages whatsoever arising from or related to this 
                document or the information contained herein.

                Vendors, end-users, and other interested parties are granted
                non-exclusive license to use this specification in connection with 
                management of the products for which it is intended to be used.

                               Copyright (C) 1995-2006 Alcatel-Lucent
	                                 ALL RIGHTS RESERVED WORLDWIDE"

		REVISION "201001200000Z"
		DESCRIPTION
			 "Added notAssigned value for objects alaEServiceSapProfilePriorityMapMode 
			  	and alaEServiceSapProfileBandwidthShare."
	
		REVISION "200912160000Z"
		DESCRIPTION
			 "The below listed objects are made as read-create in 6.6.1.680.R01
				  Post GA.
				alaEServiceUNIProfile8021xTreatment, alaEServiceUNIProfile8021ABTreatment,
				alaEServiceUNIProfile8023adTreatment & alaEServiceUNIProfileAmapTreatment."

		::= { softentIND1eService 1}
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

-- Textual Conventions

-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

AlaEServiceUNIProfileProtocolTreatment ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The behavior of the bridge in regards to the given protocols packets received on 
        the UNI. Tunnel (1) enables the packets to be tunneled across the provider 
        network.  Discard (2) causes the packets to be discarded and not enter
        the provider network. Peer (3) means that on this port the bridge is to 
        participate in the protocol. Mac-Tunnel (4) enables mac-tunnelling."
        SYNTAX   INTEGER
        {
                tunnel (1),
                drop (2),
                peer (3),
		macTunnel (4)
        }

-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

alcatelIND1eServiceMIBObjects OBJECT-IDENTITY
        STATUS current
        DESCRIPTION
            "Branch For E-Service Managed Objects."
     	::= { alcatelIND1EServiceMIB 1 }

alcatelIND1EServiceMIBConformance OBJECT-IDENTITY
        STATUS current
        DESCRIPTION
            "Branch For E-Service Conformance Information."
    	::= { alcatelIND1EServiceMIB 2 }

alcatelIND1EServiceMIBGroups OBJECT-IDENTITY
        STATUS current
        DESCRIPTION
            "Branch For E-Service Units Of Conformance."
     	::= { alcatelIND1EServiceMIBConformance 1 }

alcatelIND1EServiceMIBCompliances OBJECT-IDENTITY
        STATUS current
        DESCRIPTION
            "Branch For E-Service Compliance Statements."
    	 ::= { alcatelIND1EServiceMIBConformance 2 }


-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

--  The E-Service Group 

     alaEService OBJECT IDENTIFIER ::= { alcatelIND1eServiceMIBObjects 1 }

-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
alaEServiceInfo OBJECT IDENTIFIER ::= { alaEService 1 }


alaEServiceMode  OBJECT-TYPE
        SYNTAX  INTEGER
        {
                legacyMode (1),
                eServiceMode (2)
        }
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
        "The current mode configured for Vlan Stacking and Layer 2 tunnel configuration. 
        legacyMode (1) indicates that the commands from AlcatelIND1VLANStacking.mib are
        to be used. eServiceMode (2) indicates the commands from this MIB are to be used."
        DEFVAL { legacyMode }
        ::= { alaEServiceInfo 1 }

alaEServiceStatReset   OBJECT-TYPE
        SYNTAX  INTEGER
        {
                default(0),
                reset(1)
        }
        MAX-ACCESS      read-write
        STATUS  current
        DESCRIPTION
        "Defines the global clear statistics control for ethernet-service
        counters.
        default(0) - default value for this object,
        reset(1)   - indicates that all ethernet-service counters should be
                     cleared."
        DEFVAL  { default }
        ::= { alaEServiceInfo 2 }

-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

--   The E-Service SAP Profile Table

-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

alaEServiceSapProfileTable OBJECT-TYPE
        SYNTAX  SEQUENCE OF  AlaEServiceSapProfileEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
        "A table that contains service profiles containing performance and control attributes. 
        An entry in this table is created when a new service profile is defined."
        ::= { alaEService 2 }

alaEServiceSapProfileEntry  OBJECT-TYPE
        SYNTAX  AlaEServiceSapProfileEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
        "A E-Service Service Profile entry."
        INDEX   { IMPLIED alaEServiceSapProfileID }
        ::= { alaEServiceSapProfileTable 1 }

AlaEServiceSapProfileEntry ::= SEQUENCE 
        {
                alaEServiceSapProfileID		                DisplayString, 
		alaEServiceSapProfileCVLANTreatment		INTEGER,
		alaEServiceSapProfileReplacementCVLAN		INTEGER,
		alaEServiceSapProfilePriorityMapMode	        INTEGER, 
		alaEServiceSapProfileFixedPriority	        INTEGER,
		alaEServiceSapProfileIngressBW    		Integer32,
                alaEServiceSapProfileBandwidthShare             INTEGER,
		alaEServiceSapProfileRowStatus                  RowStatus,
                alaEServiceSapProfileEgressBW                   Integer32,
                alaEServiceSapProfileCIR                        Integer32,
                alaEServiceSapProfileCBS                        Integer32,
                alaEServiceSapProfilePIR                        Integer32,
                alaEServiceSapProfilePBS                        Integer32

        }

alaEServiceSapProfileID OBJECT-TYPE
        SYNTAX  DisplayString (SIZE (1..31))
        MAX-ACCESS not-accessible 
        STATUS  current
        DESCRIPTION
        "A label given to uniquely identify this profile. Must be at least one character long."
        ::= { alaEServiceSapProfileEntry 1 }

alaEServiceSapProfileCVLANTreatment  OBJECT-TYPE
        SYNTAX  INTEGER
        {
                stackSVLAN (1),
                translate (2),
                changeCVLAN (3)
        }
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
        "The type of VLAN stacking operation to be performed on a customer frame entering 
        this service.  Stack Svlan (1) indicates that the SVLAN is to be pre-pended on the 
        frame before any existing 802.1Q tag.  Translate (2) means to replace the existing 
        802.1Q tag with the SVLAN.  Change CVLAN (3) indicates that the customer tag is to 
        remain on the frame but its value is to be changed to the supplied value."
        DEFVAL { stackSVLAN }
        ::= { alaEServiceSapProfileEntry 2 }

alaEServiceSapProfileReplacementCVLAN  OBJECT-TYPE
        SYNTAX  INTEGER (1..4094)
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
        "The CVLAN ID to use when using the Change CVLAN treatment mode."
        ::= { alaEServiceSapProfileEntry 3 }

alaEServiceSapProfilePriorityMapMode  OBJECT-TYPE
        SYNTAX  INTEGER
        {
		notAssigned(0),
                mapInnerPtoOuterP (1),
                mapInnerDscpToOuterP(2),
                fixedP (3)
        }
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
        "This object describes the source of the value for the priority field of the SVLAN 
        802.1Q tag when pre-pended to the customer data frame.  If set to notAssigned(0), SAP 
	priority limit parameter will not be effective, QoS priority settings needs to be 
	configured. mapInnerPtoOuterP (1) uses the priority field of the incoming frame when 
	tagged to fill in the priority field of the SVLAN tag. mapInnerDscpToOuterP (2) uses 
	the frames priority bits in its IP DSCP field to fill in the priority field of the
        SVLAN tag. FixedP (3) uses the supplied FixedPriorityValue to fill in the SVLAN tag 
	priority bits."
        DEFVAL { fixedP }
        ::= { alaEServiceSapProfileEntry 4 }

alaEServiceSapProfileFixedPriority  OBJECT-TYPE
        SYNTAX  INTEGER (0..7)
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
        "This object describes the value of the priority field of the 802.1Q SVLAN tag 
        pre-pended to customer data frames when the fixed priority mapping mode is selected." 
        DEFVAL { 0 }
        ::= { alaEServiceSapProfileEntry 5 }

alaEServiceSapProfileIngressBW  OBJECT-TYPE
        SYNTAX  Integer32
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
        "This object describes this limit of ingress bandwidth for the traffic to which 
        this profile is applied. If 0, no bandwidth limit is applied.  This number represents 
        traffic in units of 1,000,000 bits per second. Note that all CVLAN that belong to this
        SAP will share this aggregated limit."
        ::= { alaEServiceSapProfileEntry 6 }

alaEServiceSapProfileBandwidthShare  OBJECT-TYPE
        SYNTAX  INTEGER
        {
	        notApplicable(0),	
                shared (1),
                notShared(2),
		notAssigned(3)
        }
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
        "This object describes the use of the bandwidth limit in how it is applied across 
        multiple ports of the SAP. If set to notApplicable(0), the SAP is not used. If set 
	to Shared (1), all the ports that are part of the SAP will use aggregated
        bandwidth, sharing some part of the bandwidth limit. If set to notShared (2),
        each port will use its own bandwidth meter for this SAP. This value is not used
        if ingressBandwidth is 0. If set to notAssigned(3), SAP bandwidth limit parameter 
	will not be effective, QoS bandwith settings needs to be configured."
        DEFVAL { shared }
        ::= { alaEServiceSapProfileEntry 7 }

alaEServiceSapProfileRowStatus OBJECT-TYPE
        SYNTAX  RowStatus
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
        "The status of this table entry."
        ::= { alaEServiceSapProfileEntry 8 }

alaEServiceSapProfileEgressBW  OBJECT-TYPE
        SYNTAX  Integer32
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
        "This object describes this limit of egress bandwidth for each UNI 
        of the SAP to which this profile is applied. If 0, no bandwidth limit 
        is applied.  This number represents traffic in units of Megabits per 
        second. Note that all CVLAN that belong to this SAP will share this 
        aggregated limit."
        DEFVAL { 0 } 
        ::= { alaEServiceSapProfileEntry 9 }

alaEServiceSapProfileCIR OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "Committed Information Rate - bandwidth values in bits per second."
        DEFVAL      { 0 }
        ::= { alaEServiceSapProfileEntry 10 }

alaEServiceSapProfileCBS  OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "Committed Burst Size - bucket size in byte."
        DEFVAL      { 0 }
        ::= { alaEServiceSapProfileEntry 11 }

alaEServiceSapProfilePIR  OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "Peak Information Rate - bandwidth values in bits per second."
        DEFVAL      { 0 }
        ::= { alaEServiceSapProfileEntry 12 }

alaEServiceSapProfilePBS  OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "Peak Burst Size - bucket size in byte."
        DEFVAL      { 0 }
        ::= { alaEServiceSapProfileEntry 13 }
  
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

--   The E-Service UNI Profile Table

-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

alaEServiceUNIProfileTable OBJECT-TYPE
        SYNTAX  SEQUENCE OF  AlaEServiceUNIProfileEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
        "A table that contains service profiles containing performance and control attributes. 
        An entry in this table is created when a new service profile is defined."
        ::= { alaEService 3 }

alaEServiceUNIProfileEntry  OBJECT-TYPE
        SYNTAX  AlaEServiceUNIProfileEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
        "A E-Service Service Profile entry."
        INDEX   { IMPLIED alaEServiceUNIProfileID }
        ::= { alaEServiceUNIProfileTable 1 }

AlaEServiceUNIProfileEntry ::= SEQUENCE 
        {
                alaEServiceUNIProfileID		                DisplayString, 
		alaEServiceUNIProfileStpBpduTreatment		AlaEServiceUNIProfileProtocolTreatment,
		alaEServiceUNIProfile8021xTreatment		AlaEServiceUNIProfileProtocolTreatment,
		alaEServiceUNIProfile8021ABTreatment		AlaEServiceUNIProfileProtocolTreatment,
		alaEServiceUNIProfile8023adTreatment		AlaEServiceUNIProfileProtocolTreatment,
		alaEServiceUNIProfileGvrpTreatment		AlaEServiceUNIProfileProtocolTreatment,
		alaEServiceUNIProfileAmapTreatment		AlaEServiceUNIProfileProtocolTreatment,
		alaEServiceUNIProfileRowStatus                  RowStatus,
                alaEServiceUNIProfileMvrpTreatment                AlaEServiceUNIProfileProtocolTreatment,
		alaEServiceUNIProfileTunnelMac                  MacAddress,
                alaEServiceUNIProfileLacpMarkerTreatment        AlaEServiceUNIProfileProtocolTreatment,
                alaEServiceUNIProfileOamTreatment               AlaEServiceUNIProfileProtocolTreatment,
                alaEServiceUNIProfileCiscoPagpTreatment         AlaEServiceUNIProfileProtocolTreatment,
                alaEServiceUNIProfileCiscoUdldTreatment         AlaEServiceUNIProfileProtocolTreatment,
                alaEServiceUNIProfileCiscoCdpTreatment          AlaEServiceUNIProfileProtocolTreatment,
                alaEServiceUNIProfileCiscoVtpTreatment          AlaEServiceUNIProfileProtocolTreatment,
                alaEServiceUNIProfileCiscoDtpTreatment          AlaEServiceUNIProfileProtocolTreatment,
                alaEServiceUNIProfileCiscoPvstTreatment         AlaEServiceUNIProfileProtocolTreatment,
                alaEServiceUNIProfileCiscoVlanTreatment         AlaEServiceUNIProfileProtocolTreatment,
                alaEServiceUNIProfileCiscoUplinkTreatment       AlaEServiceUNIProfileProtocolTreatment
        }

alaEServiceUNIProfileID OBJECT-TYPE
        SYNTAX  DisplayString (SIZE (1..31))
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
        "A label given to uniquely identify this profile. Must be at least one character long."
        ::= { alaEServiceUNIProfileEntry 1 }

alaEServiceUNIProfileStpBpduTreatment  OBJECT-TYPE
        SYNTAX  AlaEServiceUNIProfileProtocolTreatment
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
        "This object describes the behavior of the bridge in regards to the spanning tree 
        protocol BPDU received on the UNI. Tunnel (1) enables the PDU to be tunneled across 
        the provider network.  Discard (2) causes the PDU of the protocol to be discarded 
        and not enter the provider network. Peer (3) means that on this port the bridge 
        is to participate in the protocol. Mac-Tunnel (4) enables mac-tunnelling."
        DEFVAL { tunnel }
        ::= { alaEServiceUNIProfileEntry 2 }

alaEServiceUNIProfile8021xTreatment  OBJECT-TYPE
        SYNTAX  AlaEServiceUNIProfileProtocolTreatment
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
        "This object describes the behavior of the bridge in regards to the IEEE 802.1x PDU 
        frames received on the UNI. Tunnel (1) enables the PDU to be tunneled across 
        the provider network.  Discard (2) causes the PDU of the protocol to be discarded 
        and not enter the provider network. Peer (3) means that on this port the bridge 
        is to participate in the protocol. Mac-Tunnel (4) enables mac-tunnelling."
        DEFVAL { drop }
        ::= { alaEServiceUNIProfileEntry 3 }

alaEServiceUNIProfile8021ABTreatment  OBJECT-TYPE
        SYNTAX  AlaEServiceUNIProfileProtocolTreatment
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
        "This object describes the behavior of the bridge in regards to the IEEE 802.1AB PDU 
        frames received on the UNI. Tunnel (1) enables the PDU to be tunneled across 
        the provider network.  Discard (2) causes the PDU of the protocol to be discarded 
        and not enter the provider network. Peer (3) means that on this port the bridge 
        is to participate in the protocol. Mac-Tunnel (4) enables mac-tunnelling." 
        DEFVAL { drop }
        ::= { alaEServiceUNIProfileEntry 4 }

alaEServiceUNIProfile8023adTreatment  OBJECT-TYPE
        SYNTAX  AlaEServiceUNIProfileProtocolTreatment
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
        "This object describes the behavior of the bridge in regards to the IEEE 802.1ad PDU 
        frames received on the UNI. Tunnel (1) enables the PDU to be tunneled across 
        the provider network.  Discard (2) causes the PDU of the protocol to be discarded 
        and not enter the provider network. Peer (3) means that on this port the bridge 
        is to participate in the protocol. Mac-Tunnel (4) enables mac-tunnelling."
        DEFVAL { peer }
        ::= { alaEServiceUNIProfileEntry 5 }

alaEServiceUNIProfileGvrpTreatment  OBJECT-TYPE
        SYNTAX  AlaEServiceUNIProfileProtocolTreatment
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
        "This object describes the behavior of the bridge in regards to the GVRP PDU 
        frames received on the UNI. Tunnel (1) enables the PDU to be tunneled across 
        the provider network.  Discard (2) causes the PDU of the protocol to be discarded 
        and not enter the provider network. Peer (3) means that on this port the bridge 
        is to participate in the protocol. Mac-Tunnel (4) enables mac-tunnelling."
        DEFVAL { tunnel }
        ::= { alaEServiceUNIProfileEntry 6 }

alaEServiceUNIProfileAmapTreatment  OBJECT-TYPE
        SYNTAX  AlaEServiceUNIProfileProtocolTreatment
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
        "This object describes the behavior of the bridge in regards to the Alcatel
        propietary AMAP PDU frames received on the UNI. Tunnel (1) enables the PDU to 
        be tunneled across the provider network.  Discard (2) causes the PDU of the 
        protocol to be discarded and not enter the provider network. Peer (3) means 
        that on this port the bridge is to participate in the protocol. Mac-Tunnel (4) enables mac-tunnelling.
        Currenly mac-tunnel is not supported"
        DEFVAL { drop }
        ::= { alaEServiceUNIProfileEntry 7 }

alaEServiceUNIProfileRowStatus OBJECT-TYPE
        SYNTAX  RowStatus
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
        "The status of this table entry."
        ::= { alaEServiceUNIProfileEntry 8 }	

alaEServiceUNIProfileMvrpTreatment  OBJECT-TYPE	 
         SYNTAX  AlaEServiceUNIProfileProtocolTreatment	 
         MAX-ACCESS  read-create	 
         STATUS  current	 
         DESCRIPTION	 
         "This object describes the behavior of the bridge in regards to the MVRP PDU 	 
         frames received on the UNI. Tunnel (1) enables the PDU to be tunneled across 	 
         the provider network.  Discard (2) causes the PDU of the protocol to be discarded 	 
         and not enter the provider network. Peer (3) means that on this port the bridge 	 
         is to participate in the protocol. Currently peer is not supported for MVRP"	 
         DEFVAL { tunnel }	 
         ::= { alaEServiceUNIProfileEntry 9 }

alaEServiceUNIProfileTunnelMac OBJECT-TYPE
        SYNTAX MacAddress
        MAX-ACCESS read-create
        STATUS  current
        DESCRIPTION
        "This object specifies the tunnel mac used to tunnel L2 protocol to NNI ports"
        ::= { alaEServiceUNIProfileEntry 10 }


alaEServiceUNIProfileLacpMarkerTreatment  OBJECT-TYPE
        SYNTAX  AlaEServiceUNIProfileProtocolTreatment
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
        "This object describes the behavior of the bridge in regards to the LACP MARKER PDU
        frames received on the UNI. Tunnel (1) enables the PDU to
        be tunneled across the provider network.  Discard (2) causes the PDU of the
        protocol to be discarded and not enter the provider network. Peer (3) means
        that on this port the bridge is to participate in the protocol. Mac-Tunnel (4) enables mac-tunnelling." 
        DEFVAL { peer }
        ::= { alaEServiceUNIProfileEntry 11 }

alaEServiceUNIProfileOamTreatment  OBJECT-TYPE
        SYNTAX  AlaEServiceUNIProfileProtocolTreatment
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
        "This object describes the behavior of the bridge in regards to the OAM PDU
        frames received on the UNI. Tunnel (1) enables the PDU to
        be tunneled across the provider network.  Discard (2) causes the PDU of the
        protocol to be discarded and not enter the provider network. Peer (3) means
        that on this port the bridge is to participate in the protocol. Mac-Tunnel (4) enables mac-tunnelling." 
        DEFVAL { peer }
        ::= { alaEServiceUNIProfileEntry 12 }

alaEServiceUNIProfileCiscoPagpTreatment OBJECT-TYPE
        SYNTAX  AlaEServiceUNIProfileProtocolTreatment
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
        "This object describes the behavior of the bridge in regards to the PAGP PDU
        frames received on the UNI. Tunnel (1) enables the PDU to
        be tunneled across the provider network.  Discard (2) causes the PDU of the
        protocol to be discarded and not enter the provider network. Peer (3) means
        that on this port the bridge is to participate in the protocol. Mac-Tunnel (4) enables mac-tunnelling.
        Currently peer is not supported"
        DEFVAL { drop }
        ::= { alaEServiceUNIProfileEntry 13 }

alaEServiceUNIProfileCiscoUdldTreatment OBJECT-TYPE
        SYNTAX  AlaEServiceUNIProfileProtocolTreatment
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
        "This object describes the behavior of the bridge in regards to the UDLD PDU
        frames received on the UNI. Tunnel (1) enables the PDU to
        be tunneled across the provider network.  Discard (2) causes the PDU of the
        protocol to be discarded and not enter the provider network. Peer (3) means
        that on this port the bridge is to participate in the protocol. Mac-Tunnel (4) enables mac-tunnelling." 
        DEFVAL { drop }
        ::= { alaEServiceUNIProfileEntry 14 }

alaEServiceUNIProfileCiscoCdpTreatment OBJECT-TYPE
        SYNTAX  AlaEServiceUNIProfileProtocolTreatment
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
        "This object describes the behavior of the bridge in regards to the CDC PDU
        frames received on the UNI. Tunnel (1) enables the PDU to
        be tunneled across the provider network.  Discard (2) causes the PDU of the
        protocol to be discarded and not enter the provider network. Peer (3) means
        that on this port the bridge is to participate in the protocol. Mac-Tunnel (4) enables mac-tunnelling.
        Currently peer is not supported"
        DEFVAL { drop }
        ::= { alaEServiceUNIProfileEntry 15 }

alaEServiceUNIProfileCiscoVtpTreatment OBJECT-TYPE
        SYNTAX  AlaEServiceUNIProfileProtocolTreatment
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
        "This object describes the behavior of the bridge in regards to the VTP PDU
        frames received on the UNI. Tunnel (1) enables the PDU to
        be tunneled across the provider network.  Discard (2) causes the PDU of the
        protocol to be discarded and not enter the provider network. Peer (3) means
        that on this port the bridge is to participate in the protocol. Mac-Tunnel (4) enables mac-tunnelling. 
        Currently peer is not supported"
        DEFVAL { drop }
        ::= { alaEServiceUNIProfileEntry 16 }

alaEServiceUNIProfileCiscoDtpTreatment OBJECT-TYPE
        SYNTAX  AlaEServiceUNIProfileProtocolTreatment
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
        "This object describes the behavior of the bridge in regards to the DTP PDU
        frames received on the UNI. Tunnel (1) enables the PDU to
        be tunneled across the provider network.  Discard (2) causes the PDU of the
        protocol to be discarded and not enter the provider network. Peer (3) means
        that on this port the bridge is to participate in the protocol. Mac-Tunnel (4) enables mac-tunnelling. 
        Currently peer not supported"
        DEFVAL { drop }
        ::= { alaEServiceUNIProfileEntry 17 }


alaEServiceUNIProfileCiscoPvstTreatment OBJECT-TYPE
        SYNTAX  AlaEServiceUNIProfileProtocolTreatment
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
        "This object describes the behavior of the bridge in regards to the PVST PDU
        frames received on the UNI. Tunnel (1) enables the PDU to
        be tunneled across the provider network.  Discard (2) causes the PDU of the
        protocol to be discarded and not enter the provider network. Peer (3) means
        that on this port the bridge is to participate in the protocol. Mac-Tunnel (4) enables mac-tunnelling.
	Currently peer not supported"
        DEFVAL { drop }
        ::= { alaEServiceUNIProfileEntry 18 }

alaEServiceUNIProfileCiscoVlanTreatment OBJECT-TYPE
        SYNTAX  AlaEServiceUNIProfileProtocolTreatment
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
        "This object describes the behavior of the bridge in regards to the VLAN PDU
        frames received on the UNI. Tunnel (1) enables the PDU to
        be tunneled across the provider network.  Discard (2) causes the PDU of the
        protocol to be discarded and not enter the provider network. Peer (3) means
        that on this port the bridge is to participate in the protocol. Mac-Tunnel (4) enables mac-tunnelling.
	Currently peer not supported"
        DEFVAL { drop }
        ::= { alaEServiceUNIProfileEntry 19 }

alaEServiceUNIProfileCiscoUplinkTreatment OBJECT-TYPE
        SYNTAX  AlaEServiceUNIProfileProtocolTreatment
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
        "This object describes the behavior of the bridge in regards to the UPLINK PDU
        frames received on the UNI. Tunnel (1) enables the PDU to
        be tunneled across the provider network.  Discard (2) causes the PDU of the
        protocol to be discarded and not enter the provider network. Peer (3) means
        that on this port the bridge is to participate in the protocol. Mac-Tunnel(4) enables mac-tunnelling.
	Currently peer not supported." 
        DEFVAL { drop }
        ::= { alaEServiceUNIProfileEntry 20 }


-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

--  The E-Service Service Table 

-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

alaEServiceTable OBJECT-TYPE
        SYNTAX  SEQUENCE OF  AlaEServiceEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
        "A table that contains the services and their assigned SVLAN for the
        E-Service feature."
        ::= { alaEService 4 }
        
alaEServiceEntry  OBJECT-TYPE
        SYNTAX  AlaEServiceEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
        "The svlan/ipmvlan-port association."
        INDEX   { IMPLIED alaEServiceID }
        ::= { alaEServiceTable 1 }
        
AlaEServiceEntry ::=   SEQUENCE 
        {
                alaEServiceID       		DisplayString,
		alaEServiceSVLAN    		INTEGER,
                alaEServiceVlanType             INTEGER,
		alaEServiceRowStatus		RowStatus,
                alaEServiceStatGreenCount       Counter64,
                alaEServiceStatYellowCount      Counter64,
                alaEServiceStatRedCount         Counter64
        }

alaEServiceID  OBJECT-TYPE
        SYNTAX  DisplayString (SIZE(1..32))
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
        "A label given to uniquely identify this Service. Must be at least one character long."
        ::= { alaEServiceEntry 1 }

alaEServiceSVLAN OBJECT-TYPE
        SYNTAX  INTEGER (1..4094)
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
        "The SVLAN number of the SVLAN chosen to the be transport for this service."
        ::= { alaEServiceEntry 2 }
        
alaEServiceVlanType OBJECT-TYPE
        SYNTAX  INTEGER {
                  unknown(0),
                  svlan(1),
                  ipmvlan(2)
                }
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
        "The type of the vlan this service is going to attach to. When creating the service,
        the type should match the vlanId specified in the request."
        ::= { alaEServiceEntry 3 }

alaEServiceRowStatus OBJECT-TYPE
        SYNTAX  RowStatus
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
        "The status of this table entry.  The supported value for set are 
        createAndGo (4) and destroy(6), to add or remove a service. When
        creating or deleting the service, the user needs to provide both
        the svlan and the vlantype objects."
        ::= { alaEServiceEntry 4 }	

alaEServiceStatGreenCount  OBJECT-TYPE
        SYNTAX  Counter64
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
        "Counter for the number of packets/bytes being Green compliant (i.e. in case of srTCM
        and trTCM, packet is CIR/CBS compliant)."
        ::= { alaEServiceEntry 5 }

alaEServiceStatYellowCount  OBJECT-TYPE
        SYNTAX  Counter64
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
        "Counter for the number of packets/bytes being Yellow compliant (i.e. in case of srTCM
        and trTCM, packet is PIR/PBS compliant)."
        ::= { alaEServiceEntry 6 }

alaEServiceStatRedCount  OBJECT-TYPE
SYNTAX  Counter64
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
        "Counter for the number of packets/bytes being Red compliant (i.e. in case of srTCM
        and trTCM, packet is neither CIR/CBS nor PIR/PBS compliant)."
        ::= { alaEServiceEntry 7 }

-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

--  The E-Service SAP Table 

-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
alaEServiceSapTable OBJECT-TYPE
        SYNTAX  SEQUENCE OF  AlaEServiceSapEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
        "A table that contains the Service Access Points (Sap) listed by ID. 
        This table is used to create, delete, and modify the SAP's profile"
        ::= { alaEService 5 }
        
alaEServiceSapEntry  OBJECT-TYPE
        SYNTAX  AlaEServiceSapEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
        "The list of SAP."
        INDEX   { alaEServiceSapID}
        ::= { alaEServiceSapTable 1 }
        
AlaEServiceSapEntry ::=   SEQUENCE 
        {
                alaEServiceSapID		Integer32,
                alaEServiceSapServiceID         DisplayString,
                alaEServiceSapProfile           DisplayString,
		alaEServiceSapRowStatus		RowStatus
        }

alaEServiceSapID  OBJECT-TYPE
        SYNTAX Integer32 
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
        "A Number given to uniquely identify the SAP."
        ::= { alaEServiceSapEntry 1 }

alaEServiceSapServiceID  OBJECT-TYPE
        SYNTAX  DisplayString (SIZE(1..32))
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
        "A label given to uniquely identify the Service this SAP is for. Must 
        be at least one character long."
        ::= { alaEServiceSapEntry 2 }

alaEServiceSapProfile  OBJECT-TYPE
        SYNTAX  DisplayString (SIZE(1..32))
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
        "The string identifying the SAP Profile this sap is to use. If specified, must match an existing 
        SAP Profile."
        ::= { alaEServiceSapEntry 3 }

alaEServiceSapRowStatus OBJECT-TYPE
        SYNTAX  RowStatus
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
        "The status of this table entry. The supported value for set are 
        createAndGo (4) and destroy(6), to add or remove a sap. When 
        creating the sap, the user needs to provide the service name in
        the same set request."
        ::= { alaEServiceSapEntry 4 }

-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

--  The E-Service SAP CVLAN Table 

-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

alaEServiceSapCvlanTable OBJECT-TYPE
        SYNTAX  SEQUENCE OF  AlaEServiceSapCvlanEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
        "A table that contains the Service Access Points (Sap) where the CVLANs are bound 
        to their service."
        ::= { alaEService 6 }
        
alaEServiceSapCvlanEntry  OBJECT-TYPE
        SYNTAX  AlaEServiceSapCvlanEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
        "The CVLAN to Sap binding."
        INDEX   { alaEServiceSapCvlanSapID, alaEServiceSapCvlanCvlan }
        ::= { alaEServiceSapCvlanTable 1 }
        
AlaEServiceSapCvlanEntry ::=   SEQUENCE 
        {
                alaEServiceSapCvlanSapID   	Integer32,
		alaEServiceSapCvlanCvlan	INTEGER,
		alaEServiceSapCvlanMapType      INTEGER,
		alaEServiceSapCvlanRowStatus		RowStatus
        }

alaEServiceSapCvlanSapID  OBJECT-TYPE
        SYNTAX Integer32 
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
        "A Number given to uniquely identify this SAP."
        ::= { alaEServiceSapCvlanEntry 1 }

alaEServiceSapCvlanCvlan  OBJECT-TYPE
        SYNTAX INTEGER (0..4094)
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
        "This object is the CVLAN ID that this binding is targeted at.  The CVLAN ID 
        may be 0, which indicates an all or untagged only mapping type."
        ::= { alaEServiceSapCvlanEntry 2 }

alaEServiceSapCvlanMapType  OBJECT-TYPE
        SYNTAX  INTEGER
        {
                single (1),
                all(2),
                untaggedOnly (3)
        }
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
        "This object is the mapping type that defines what CVLANs are mapped into this service.
        Multiple mappings can be defined for CVLAN to service, however only one all (2) or 
        untaggedOnly (3) mapping entry can be created per UNI.  A mapping type of Single (1) 
        denotes a specific CVLAN value to bind to the service. A mapping type of All (2) 
        denotes that all customer frames that do not map to any other SAP, 
        will be mapped into this service.  A mapping type of Untagged (3) denotes that only 
        the untagged frames will be mapped into this service."
        DEFVAL { single }
        ::= { alaEServiceSapCvlanEntry 3 }

alaEServiceSapCvlanRowStatus OBJECT-TYPE
        SYNTAX  RowStatus
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
        "The status of this table entry.  The supported value for set are 
        createAndGo (4) and destroy(6), to add or remove a SAP."
        ::= { alaEServiceSapCvlanEntry 4 }


-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

--  The E-Service Port Table 

-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

alaEServicePortTable OBJECT-TYPE
        SYNTAX  SEQUENCE OF  AlaEServicePortEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
        "A table that contains the ports used by the EService feature.  Both UNI and NNI
        are listed here."
        ::= { alaEService 7 }
        
alaEServicePortEntry  OBJECT-TYPE
        SYNTAX  AlaEServicePortEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
        "The list of ports being used by EService."
        INDEX   { alaEServicePortID}
        ::= { alaEServicePortTable 1 }
        
AlaEServicePortEntry ::=   SEQUENCE 
        {
                alaEServicePortID		InterfaceIndex,
                alaEServicePortType		INTEGER,
		alaEServicePortVendorTpid	Integer32,
		alaEServicePortLegacyStpBpdu	INTEGER,
		alaEServicePortLegacyGvrpPdu	INTEGER,
		alaEServicePortUniProfile	DisplayString,
		alaEServicePortTransBridging    INTEGER,
                alaEServicePortLegacyMvrpPdu        INTEGER
        }

alaEServicePortID  OBJECT-TYPE
        SYNTAX InterfaceIndex 
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
        "The IfIndex of this UNI or NNI Port."
        ::= { alaEServicePortEntry 1 }

alaEServicePortType  OBJECT-TYPE
        SYNTAX  INTEGER
        {
                uni (1),
                nni (3)
        }
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
        "The type of port for Vlan Stacking operation. uni (1) represents a customer facing
        port on which traffic may enter the E-Service.  nni (2) respresents a provider network 
        port over which the E-Service may be connected."
        DEFVAL { uni }
        ::= { alaEServicePortEntry 2 }

alaEServicePortVendorTpid  OBJECT-TYPE
        SYNTAX Integer32 
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
        "he TPID for this port if type is NNI. It is used for the incoming data
        traffic parsing and it is substituted to the 802.1Q standard Tpid for 
        the outgoing data traffic. This is used for compatibility with other vendor 
        equipment. The default value is the standard value 0x8100."
        DEFVAL { 33024 }
        ::= { alaEServicePortEntry 3 }

alaEServicePortLegacyStpBpdu  OBJECT-TYPE
        SYNTAX  INTEGER
        {
		notApplicable (0),
                enable (1),
                disable (2)
        }
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
        "The legacy STP BPDU treatment for this port if NNI. It defines the type of processing 
         applied to STP legacy BPDUs on network ports. Legacy BPDU refer to conventional/customer
         BPDUs with MAC address 01:80:c2:00:00:00 and its processing on network ports can be 
         enabled/disabled by this object.By default the value is disabled i.e 
         provider MAC BPDU with MAC address 01:80:c2:00:00:08 would be processed at network ports."
        DEFVAL { disable }
        ::= { alaEServicePortEntry 4 }

alaEServicePortLegacyGvrpPdu  OBJECT-TYPE
        SYNTAX  INTEGER
        {
		notApplicable (0),
                enable (1),
                disable (2)
        }
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
        "The legacy GVRP PDU treatment for this port if NNI. It defines the type of processing 
         applied to GVRP PDUs on network ports. "
        DEFVAL { disable }
        ::= { alaEServicePortEntry 5 }
 
alaEServicePortUniProfile OBJECT-TYPE
        SYNTAX  DisplayString (SIZE (1..31))
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
        "The label of an existing UNI profile that which contains various properties to be 
        applied to this port if UNI."
        ::= { alaEServicePortEntry 6 }

alaEServicePortTransBridging  OBJECT-TYPE
        SYNTAX  INTEGER
        {
                enable (1),
                disable (2)
        }
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
        "The Transparent Bridging status for the nni Port."
        DEFVAL { disable }
        ::= { alaEServicePortEntry 7 }

alaEServicePortLegacyMvrpPdu  OBJECT-TYPE	 
       SYNTAX  INTEGER	 
       {	 
               notApplicable (0),	 
               enable (1),	 
               disable (2)	 
       }	 
       MAX-ACCESS  read-write	 
       STATUS  current	 
       DESCRIPTION	 
       "The legacy MVRP PDU treatment for this port if NNI. It defines the type of processing 	 
        applied to MVRP PDUs on network ports. "	 
       DEFVAL { disable }	 
       ::= { alaEServicePortEntry 8 }	

-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

--  The E-Service SAP-UNI Binding Table 

-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
alaEServiceSapUniTable OBJECT-TYPE
        SYNTAX  SEQUENCE OF  AlaEServiceSapUniEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
        "A table that contains the UNI that are bound to each SAP for classifying 
        traffic into each EService. Not that writing to this table may create
        a new UNI."
        ::= { alaEService 8 }
        
alaEServiceSapUniEntry  OBJECT-TYPE
        SYNTAX  AlaEServiceSapUniEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
        "The list of SAP-UNI bindings being used by EService."
        INDEX   { alaEServiceSapUniSap, alaEServiceSapUniUni}
        ::= { alaEServiceSapUniTable 1 }
        
AlaEServiceSapUniEntry ::=   SEQUENCE 
        {
                alaEServiceSapUniSap		Integer32,
                alaEServiceSapUniUni	        InterfaceIndex,
		alaEServiceSapUniRowStatus	RowStatus
        }


alaEServiceSapUniSap  OBJECT-TYPE
        SYNTAX Integer32 
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
        "The SAP ID that is configured onto this port."
        ::= { alaEServiceSapUniEntry 1 }

alaEServiceSapUniUni  OBJECT-TYPE
        SYNTAX InterfaceIndex 
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
        "The IfIndex of this UNI Port."
        ::= { alaEServiceSapUniEntry 2 }

alaEServiceSapUniRowStatus OBJECT-TYPE
        SYNTAX  RowStatus
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
        "The status of this table entry. The supported value for set are 
        createAndGo (4) and destroy(6), to add or remove a binding"
        ::= { alaEServiceSapUniEntry 3 }

-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

--  The E-Service NNI-SVLAN Binding Table 

-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
alaEServiceNniSvlanTable OBJECT-TYPE
        SYNTAX  SEQUENCE OF  AlaEServiceNniSvlanEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
        "A table that contains the SVLANs bound to each NNI for use by the 
        EService feature."
        ::= { alaEService 9 }
        
alaEServiceNniSvlanEntry  OBJECT-TYPE
        SYNTAX  AlaEServiceNniSvlanEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
        "The list of NNI-SVLAN bindings being used by EService."
        INDEX   { alaEServiceNniSvlanNni, alaEServiceNniSvlanSvlan}
        ::= { alaEServiceNniSvlanTable 1 }
        
AlaEServiceNniSvlanEntry ::=   SEQUENCE 
        {
                alaEServiceNniSvlanNni		InterfaceIndex,
                alaEServiceNniSvlanSvlan	INTEGER,
		alaEServiceNniSvlanRowStatus	RowStatus,
                alaEServiceNniSvlanVpaType	INTEGER
        }

alaEServiceNniSvlanNni  OBJECT-TYPE
        SYNTAX InterfaceIndex 
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
        "The IfIndex of this NNI Port."
        ::= { alaEServiceNniSvlanEntry 1 }

alaEServiceNniSvlanSvlan  OBJECT-TYPE
        SYNTAX INTEGER (2..4094) 
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
        "The SVLAN bound to this port. SVLAN cannot be 1."
        ::= { alaEServiceNniSvlanEntry 2 }

alaEServiceNniSvlanRowStatus OBJECT-TYPE
        SYNTAX  RowStatus
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
        "The status of this table entry. The supported value for set are 
        createAndGo (4) and destroy(6), to add or remove a binding"
        ::= { alaEServiceNniSvlanEntry 3 }

-- alaEServiceNniSvlanVpaType is added in 6.3.4.R01
 
alaEServiceNniSvlanVpaType  OBJECT-TYPE
        SYNTAX INTEGER {
                         stp (1),
                         erp (2)  
                       } 
        MAX-ACCESS  read-create 
        STATUS  current
        DESCRIPTION
        "The object is used to specify whether the VPA state is to 
        be controlled by an ERP or a STP. By default VPA state is 
        controlled by STP."
        DEFVAL  { stp }
        ::= { alaEServiceNniSvlanEntry 4 }

-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

--  The E-Service srTCM and trTCM Counter Statistics Table

-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

alaEServiceSapCvlanPortStatTable OBJECT-TYPE
        SYNTAX  SEQUENCE OF  AlaEServiceSapCvlanPortStatEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
        "A statistics table that contains the counters per SAP."
        ::= { alaEService 10 }

alaEServiceSapCvlanPortStatEntry OBJECT-TYPE
        SYNTAX  AlaEServiceSapCvlanPortStatEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
        "A E-Service Statistics Entry."
        INDEX { alaEServiceSapCvlanPortStatSapID,
                alaEServiceSapCvlanPortStatCvlanID,
                alaEServiceSapCvlanPortStatPortID }
        ::= { alaEServiceSapCvlanPortStatTable 1 }

AlaEServiceSapCvlanPortStatEntry ::=   SEQUENCE
        {
                alaEServiceSapCvlanPortStatSapID        Integer32,
                alaEServiceSapCvlanPortStatCvlanID      INTEGER,
                alaEServiceSapCvlanPortStatPortID       InterfaceIndex,
                alaEServiceSapCvlanPortStatGreenCount   Counter64,
                alaEServiceSapCvlanPortStatYellowCount  Counter64,
                alaEServiceSapCvlanPortStatRedCount     Counter64
        }

alaEServiceSapCvlanPortStatSapID OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
        "A Number given to uniquely identify the SAP."
        ::= { alaEServiceSapCvlanPortStatEntry 1 }

alaEServiceSapCvlanPortStatCvlanID OBJECT-TYPE
        SYNTAX INTEGER (0..4094)
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
        "This object is the CVLAN ID that this binding is targeted at.  The CVLAN ID
        may be 0, which indicates an all or untagged only mapping type."
        ::= { alaEServiceSapCvlanPortStatEntry 2 }

alaEServiceSapCvlanPortStatPortID OBJECT-TYPE
        SYNTAX InterfaceIndex
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
        "The IfIndex of this UNI Port."
        ::= { alaEServiceSapCvlanPortStatEntry 3 }

alaEServiceSapCvlanPortStatGreenCount OBJECT-TYPE
        SYNTAX  Counter64
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
        "Counter for the number of packets/bytes being Green compliant (i.e. in case of srTCM
        and trTCM, packet is CIR/CBS compliant) per UNI port, per CVLAN. This object is applicable
        only when ingress bandwidth is not shared across SAP ports and CVLANs."
        ::= { alaEServiceSapCvlanPortStatEntry 4 }

alaEServiceSapCvlanPortStatYellowCount  OBJECT-TYPE
        SYNTAX  Counter64
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
        "Counter for the number of packets/bytes being Yellow compliant (i.e. in case of srTCM
        and trTCM, packet is PIR/PBS compliant) per UNI port, per CVLAN. This object is applicable
        only when ingress bandwidth is not shared across SAP ports and CVLANs."
        ::= { alaEServiceSapCvlanPortStatEntry 5 }

alaEServiceSapCvlanPortStatRedCount  OBJECT-TYPE
        SYNTAX  Counter64
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
        "Counter for the number of packets/bytes being Red compliant (i.e. in case of srTCM
        and trTCM, packet is neither CIR/CBS nor PIR/PBS compliant) per UNI port, per CVLAN.
        This object is applicable only when ingress bandwidth is not shared across SAP
        ports and CVLANs."
        ::= { alaEServiceSapCvlanPortStatEntry 6 }

-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
-- COMPLIANCE
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

alcatelIND1EServiceMIBCompliance MODULE-COMPLIANCE
        STATUS  current
        DESCRIPTION
        "Compliance statement for E-Service."
        MODULE  MANDATORY-GROUPS
                {
                alaEServiceSapProfileGroup,
                alaEServiceUNIProfileGroup,
                alaEServiceGroup,
                alaEServiceSapGroup,
                alaEServiceSapUniGroup,
                alaEServiceSapCvlanGroup,
                alaEServicePortGroup, 
                alaEServiceNniSvlanGroup,
		alaEServiceSapCvlanPortStatGroup,
                alaEServiceInfoGroup
                }
        ::= { alcatelIND1EServiceMIBCompliances 1 }


-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
-- UNITS OF CONFORMANCE
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

alaEServiceSapProfileGroup OBJECT-GROUP
        OBJECTS
        {
		alaEServiceSapProfileCVLANTreatment,    
		alaEServiceSapProfileReplacementCVLAN,  
		alaEServiceSapProfilePriorityMapMode,   
		alaEServiceSapProfileFixedPriority,     
		alaEServiceSapProfileIngressBW,         
                alaEServiceSapProfileBandwidthShare,
		alaEServiceSapProfileRowStatus,
                alaEServiceSapProfileEgressBW,
                alaEServiceSapProfileCIR,
                alaEServiceSapProfileCBS,
                alaEServiceSapProfilePIR,
                alaEServiceSapProfilePBS
        }
        STATUS  current
        DESCRIPTION
        "Collection of objects for management of E-Service Sap Profiles."
        ::= { alcatelIND1EServiceMIBGroups 1 }

alaEServiceUNIProfileGroup OBJECT-GROUP
        OBJECTS
        {
		alaEServiceUNIProfileStpBpduTreatment,	   
		alaEServiceUNIProfile8021xTreatment,	   
		alaEServiceUNIProfile8021ABTreatment,	   
		alaEServiceUNIProfile8023adTreatment,	   
		alaEServiceUNIProfileGvrpTreatment,	   
		alaEServiceUNIProfileAmapTreatment,	   
		alaEServiceUNIProfileRowStatus,
                alaEServiceUNIProfileMvrpTreatment,
		alaEServiceUNIProfileTunnelMac,
                alaEServiceUNIProfileLacpMarkerTreatment,       
                alaEServiceUNIProfileOamTreatment,      
                alaEServiceUNIProfileCiscoPagpTreatment,      
                alaEServiceUNIProfileCiscoUdldTreatment,       
                alaEServiceUNIProfileCiscoCdpTreatment,
                alaEServiceUNIProfileCiscoVtpTreatment,         
                alaEServiceUNIProfileCiscoDtpTreatment,        
                alaEServiceUNIProfileCiscoPvstTreatment,          
                alaEServiceUNIProfileCiscoVlanTreatment,            
                alaEServiceUNIProfileCiscoUplinkTreatment          
        }
        STATUS current
        DESCRIPTION
        "Collection of objects for management of EService UNI Profiles."
        ::= { alcatelIND1EServiceMIBGroups 2 }

alaEServiceGroup OBJECT-GROUP
        OBJECTS
        {
		alaEServiceSVLAN,    	
                alaEServiceVlanType,
		alaEServiceRowStatus,
                alaEServiceStatGreenCount,
                alaEServiceStatYellowCount,
                alaEServiceStatRedCount
        }
        STATUS  current
        DESCRIPTION
        "Collection of objects for management of E-Services."
        ::= { alcatelIND1EServiceMIBGroups 3 }
		
alaEServiceSapGroup OBJECT-GROUP
        OBJECTS
        {

                alaEServiceSapServiceID,
                alaEServiceSapProfile,
		alaEServiceSapRowStatus
        }
        STATUS  current
        DESCRIPTION
        "Collection of objects for management of E-Service SAPs."
        ::= { alcatelIND1EServiceMIBGroups 4 }

alaEServiceSapCvlanGroup OBJECT-GROUP
        OBJECTS
        {
		alaEServiceSapCvlanMapType,      
		alaEServiceSapCvlanRowStatus		

        }
        STATUS  current
        DESCRIPTION
        "Collection of objects for management of E-Service SAP CVLAN bindings."
        ::= { alcatelIND1EServiceMIBGroups 5 }


alaEServicePortGroup OBJECT-GROUP
        OBJECTS
        {
                alaEServicePortType,
		alaEServicePortVendorTpid,
		alaEServicePortLegacyStpBpdu,
		alaEServicePortLegacyGvrpPdu,
		alaEServicePortUniProfile,
		alaEServicePortTransBridging,
                alaEServicePortLegacyMvrpPdu
        }
        STATUS  current
        DESCRIPTION
        "Collection of objects for management of E-Service Ports."
        ::= { alcatelIND1EServiceMIBGroups 6 }

alaEServiceSapUniGroup OBJECT-GROUP
        OBJECTS
        {
		alaEServiceSapUniRowStatus

        }
        STATUS  current
        DESCRIPTION
        "Collection of objects for management of E-Service SAP to UNI 
        Binding."
        ::= { alcatelIND1EServiceMIBGroups 7 }

alaEServiceNniSvlanGroup OBJECT-GROUP
        OBJECTS
        {
		alaEServiceNniSvlanRowStatus,
		alaEServiceNniSvlanVpaType

        }
        STATUS  current
        DESCRIPTION
        "Collection of objects for management of E-Service SVLAN to NNI
        Binding."
        ::= { alcatelIND1EServiceMIBGroups 8 }

alaEServiceSapCvlanPortStatGroup OBJECT-GROUP
        OBJECTS
        {
                alaEServiceSapCvlanPortStatGreenCount,
                alaEServiceSapCvlanPortStatYellowCount,
                alaEServiceSapCvlanPortStatRedCount
        }
        STATUS  current
        DESCRIPTION
        "Collection of objects for srTCM and trTCM Counters."
        ::= { alcatelIND1EServiceMIBGroups 9 }

alaEServiceInfoGroup    OBJECT-GROUP
        OBJECTS
        {
                alaEServiceMode,
                alaEServiceStatReset
        }
        STATUS  current
        DESCRIPTION
        "Collection of E-Service Global Objects."
        ::= { alcatelIND1EServiceMIBGroups 10 }

END

